Brick Pointing & Repointing Contractors In New York
Request An Estimate

About Our Brick Pointing & Repointing Services
Repointing looks simple from the sidewalk, but it is the masonry repair most often done badly. The two decisions that decide whether it lasts are how deep the old mortar comes out and what goes back in. We rake joints out to sound material — never a shallow smear over failed mortar — and we match the new mix to the original: a mortar harder than the brick forces freeze-thaw stress into the brick face and spalls it, which is why matching strength matters as much as matching color. Our masonry contractors carry repointing as part of complete wall care, so where individual units have already cracked or spalled, brick crack repair and replacement is folded into the same scope instead of being pointed over.
The work runs in a strict order: joints are cut and cleaned, the wall is wetted to control suction, mortar is packed in layers and tooled to the original profile — flush, concave or weather-struck — and the finished work is protected while it cures. On occupied buildings we manage dust, access and noise around residents, and on larger facades we sequence elevations so the building is never left open to weather. The result is a wall whose joints read as one continuous surface, shed water correctly, and return the masonry to doing the job it was built for: keeping the building dry and holding it together.
What Is Brick Pointing & Repointing?
Pointing is the finishing of mortar joints in new masonry; repointing is its repair counterpart — the removal and replacement of deteriorated mortar in an existing wall. The terms are often used interchangeably, and you will also hear tuckpointing, which is a decorative finish tooled into fresh mortar to imitate a fine, narrow joint, common on older New York brickwork.
The signs that a wall is due are easy to read once you know them: mortar recessed noticeably behind the brick face; joints that powder or crumble when probed; hairline cracks running along the edges of the units; mortar fallen out in sections; damp patches appearing on inside walls after rain; and white efflorescence salts blooming across the face. Left alone, open joints let wind-driven rain straight into the wall assembly, where it drives freeze-thaw damage to the bricks themselves. Sound repointing reverses that path: it reseals the wall’s drainage surface, restores the bond between units, and — because mortar is the sacrificial element of a brick wall by design — it is far cheaper to renew joints on a cycle than to rebuild wall sections whose units failed after years of water entry. Done with a compatible mix and proper depth, repointing routinely lasts decades.
- Our Services
Types Of Services We Offer
Full-Facade Repointing
Whole elevations raked out to sound mortar and renewed in matched mix, so the entire wall sheds water and weathers as one surface.
Spot Repointing & Joint Repair
Targeted renewal of the joints that have failed — one elevation, one chimney shoulder, one weather-beaten corner — before the damage spreads.
Mortar Matching & Custom Mixing
Mixes matched to your wall in strength, color and sand, tested on a small area first so new joints weather with the old ones.
Tuckpointing & Decorative Finishes
Fine tooled center lines and period joint profiles for older brickwork where the joint itself is part of the facade's character.
Multi-Unit & Facade Programmes
Elevation-by-elevation repointing programmes for apartment and commercial buildings, documented for facade-inspection maintenance.
Water-Resistant Repointing
Joint renewal detailed for the elevations that take driving rain, with profiles tooled to throw water off the wall face.
Brick Repair & Replacement
Cracked and spalled units cut out and replaced with matched bricks as part of the same scope, never pointed over.
Historic & Brownstone Repointing
Lime-compatible mortars and careful handwork for pre-war and landmark brickwork, matched to the original joint in every respect.
Searching for Brick Pointing & Repointing Contractors Near Me?
If you are searching for brick pointing and repointing contractors near you in New York, judge the contractor by the questions they ask about your wall — the age of the building, the original mortar, which elevations take the weather — because those answers decide the mix and the method. RT General Construction Inc is based in Yonkers and repoints brickwork across Westchester County, the Bronx, Manhattan and Queens, from single-family brick homes to multi-unit facades where joint renewal is part of Local Law 11 maintenance. On buildings covered by the Facade Inspection Safety Program, repointing is the most common repair item a filing calls for, and our elevation-by-elevation documentation of joint condition is kept in the form the filing engineer needs. We inspect in person and give you a written scope that separates the joints that need renewal now from those that can wait, so you can phase the work honestly. Our wider masonry services cover the repairs that often travel with repointing, carried by one accountable team. Call us or send the form on this page to arrange a free estimate at your property.

- Why Choose Us
Repointing Matched To The Mortar Your Wall Needs
- Mortar Matched To Wall Age
- Joints Ground To Proper Depth
- Mortar Packed In Lifts
- Test Panel Approved First
- Brick Faces Protected From Smears
- Joints Tooled To Shed Water
Honest Depth Assessment
Elevation-By-Elevation Programme
Pointing Within Full Masonry
- Our Process
Process, How we Works.
01
Recessed Or Crumbling Joints
Mortar sitting well behind the brick face, or powdering when rubbed, has lost its ability to shed water and bond the units.
02
Hairline Cracks Along Joints
Cracks where mortar meets brick are the first entry points for wind-driven rain into the wall.
03
Interior Damp After Rain
Damp patches or staining on inside walls that track storms usually trace back to open joints above.
04
Spalling Brick Faces
Brick faces popping off in flakes often mean hard, wrong mortar is forcing freeze-thaw damage into the units — a mix problem, not just age.
- Benefits
Benefits Of Hiring Us In New York
Repointing fails early when the mix is wrong or the depth is shallow. Our crews match mortar to the wall, cut to sound material and tool to the original profile — here is what that discipline gets you.
Mortar Matched To Your Wall
Strength, color and profile matched to the original, so new joints weather with the wall instead of damaging it.
Depth, Not Cosmetics
Joints raked out to sound material and packed in layers; no shallow smears that peel off in two winters.
The Whole Wall, One Team
Cracked units, lintels and flashing issues found during the work are reported and scoped, not pointed over.
Written, Phased Scopes
Elevations documented one by one, urgent joints separated from watch-list joints, so you can phase honestly.
- Our Projects
Proven Quality, Best Results
- Testimonials
Built on Trust, Proven By Testimonials
98% Clients Are Positive Reviews 1 2
- Our Faq
Clear Answers to Your Construction Questions
What Is The Difference Between Pointing And Repointing?
Pointing finishes the joints of new masonry. Repointing repairs existing walls: the deteriorated mortar is raked out to sound material and replaced with fresh mortar matched to the original. Tuckpointing is a decorative tooled finish sometimes applied during repointing on older brickwork.
How Do I Know If My Brickwork Needs Repointing?
Look for mortar recessed behind the brick face, joints that crumble or powder when probed, cracks along the edges of bricks, and interior damp that appears after rain. Any one of these means the joints have stopped shedding water and should be assessed.
How Long Does Repointing Last?
With a compatible mix, proper depth and correct tooling, repointing routinely lasts decades. Its lifespan shortens when the mortar is harder than the brick, when joints are only skimmed over, or when water is still entering from failed coping or flashing above the wall.
Can New Mortar Really Be Matched To My Older Building?
Yes. Color comes from the sand and pigment, strength from the mix proportions, and the profile from the tooling. We test and compare on a small area first, because a mortar that is too hard can crack historic brick while one that is too soft washes out early — the match has to be right on all three.
What Does Brick Repointing Cost In New York?
Cost depends on the area of wall, the depth of joint failure, access (scaffold or lift versus ladder work), and whether damaged bricks or lintels need repair in the same scope. We measure and document each elevation during the free estimate, so your written scope prices the actual condition of your wall.
Does Brick Repointing Need A Permit In NYC?
Repointing on its own generally does not require a DOB permit — it is maintenance of the existing wall. The approvals that can apply sit around it: scaffolding and sidewalk sheds carry their own permits, and landmarked buildings generally need Landmarks approval before facade work begins. We flag which of those, if any, applies to your building during the estimate.
- Services Areas
Proudly Serving Across New York
From interior renovations to exterior restoration, RT General Construction Inc delivers dependable construction and remodeling solutions for residential and commercial properties across New York. Our team handles everything from masonry, concrete, roofing, and exterior repairs to kitchens, bathrooms, painting, and interior improvements.
- New York
- Jerome Park, NY
- Village of Pelham, NY
- Harlem, NY
- Eastchester, NY
- North Side, NY
- Yonkers, NY
- New Rochelle, NY
- Pelham Manor, NY
- Mamaroneck, NY
- Larchmont, NY
- Tuckahoe, NY
- Hastings-on-Hudson, NY
- Scarsdale, NY
- Bronxville, NY
- White Plains, NY
- Manhattan, NY
- Astoria, NY
- Long Island City, NY
- Fresh Meadows, NY
- Flushing, NY
- Bayside, NY
- Queens, NY
Let's Build Something Amazing Together
Tell us about your project and we will arrange an assessment, explain what the work involves and provide a written scope before anything begins. One contractor, one plan, one accountable team — that is how RT General Construction Inc runs every job, large or small.