Roofing Repair & Installation Contractors in New York
Request An Estimate

About Our Roofing Repair & Installation Services
Roof leaks are detective work. Water enters at a failure point — a lifted shingle course, cracked flashing, a split membrane seam, a drain that no longer drains — then travels along the decking before appearing inside, sometimes rooms away from where it started. Sealing the area above the stain therefore misses the actual leak entirely. Our roofing service begins by following the water path back to the one true entry point: leak diagnosis and targeted repair of coverings, seams and details, shingle roofing repair and replacement, flat roofing for the low-slope systems common on New York buildings, flashing and metal detail renewal, and drainage correction where ponding water is shortening a roof’s life. Where a leak begins at the parapet above the roofline — one of the most misdiagnosed causes there is — the same team repairs that junction too.
Because the diagnosis comes first, the recommendation stays honest. One failed flashing detail or one damaged slope is a repair; deterioration across the whole roof is not, and we say so plainly. Replacement, when it is recommended, is treated as a system rather than a covering: tear-off to sound deck, underlayment, new covering, flashing renewed at every junction and drainage addressed together in the same scope. You receive that reasoning in writing before you commit — what we found, what we recommend, and why — so the decision is yours, made on evidence rather than on a sales conversation.
What Is Roofing Repair & Installation?
Roofing repair corrects a specific failure in an otherwise serviceable roof: a seam rebuilt, a flashing line renewed, a damaged shingle course replaced, a drain cleared and re-detailed. Installation — replacement — removes the existing system and builds a new one where the roof as a whole has reached the end of its life. Between those two depths sits most of the judgment in roofing, because the wrong choice wastes money in both directions: replacing a roof that needed one detail renewed, or repairing, storm after storm, a roof whose covering has broadly failed.
New York conditions shape every decision. Flat roofs carry ponding water and freeze-thaw cycles that work ice into seams all winter; wind-driven rain and eave ice push water back under pitched coverings; and the junctions — chimneys, walls, vents and parapets — fail earlier than the fields of the roof almost everywhere. Replacement is therefore recommended only on clear evidence: widespread deterioration, a membrane at the end of its life, damaged decking, or leaks recurring in different places. A first leak at one detail usually means one detail to repair — and our written scope shows the evidence either way.
- Our Services
Types Of Services We Offer
Roof Leak Diagnosis & Repair
The full discipline on one page: the history read, the interior evidence mapped, the roof read junction-first, and the water path reconstructed from entry point to stain before anything is quoted.
Shingle Roof Installation & Replacement
The full system build on one page: tear-off to sound deck, protection and underlayment, courses, flashing and ventilation installed as one assembly.
Flat Roof Installation & Repair
The full system scope: membrane, insulation, substrate and junctions installed or renewed as one assembly, decided on what lies beneath the existing roof.
Roof Flashing & Metal Work
The full metal discipline on one page: every junction where a roof meets something else — chimney, wall, valley, pipe, skylight, edge — read as one map and renewed as lapped metal work.
Roof Drainage & Gutter Correction
The joined exit path on one page: field falls, drains and scuppers, gutters, downspouts and discharge corrected as one system, from the pond on the field to the outlet at the ground.
Roof Coating & Waterproofing
The candidacy-led scope on one page: an existing flat roof assessed against the gate, prepared in sequence, and renewed with a liquid-applied waterproofing skin only where the roof honestly qualifies.
Searching for Roofing Contractors Near Me?
Searching for roofing contractors near you in New York? Based in Yonkers, RT General Construction Inc repairs and replaces roofs across New Rochelle, White Plains, Scarsdale, Mamaroneck, Larchmont, Harlem, Manhattan and Flushing. The process is the same everywhere: we inspect the roof and the symptoms together, find the true entry point, explain the options in plain language, and put the scope in writing before any work begins. And if a leak is active now, do not wait for it to declare itself through another ceiling — stopping the water becomes the priority, and the assessment starts from there. Roofing sits within our wider exterior services, so the parapet, facade and masonry work a roof so often needs at its edges is coordinated by the same team. Call us or send the form on this page to arrange a free estimate at your property.

- Why Choose Us
Roofing Scoped From The Leak Back To Its Source
- Leaks Traced To Their Source
- Repair Or Replace — Honestly Scoped
- Flashings & Details Renewed
- Deck Condition Checked First
- Drainage Falls Verified
- Watertight Handover, Every Time
Straightforward Condition Reports
Weather-Aware Scheduling
Roofline Trades Coordinated
- Our Process
Process, How we Works.
01
Age and overall condition
A roof near the end of its expected life with failures in several areas points to replacement.
02
Where the failures are
One flashing detail or one damaged slope is a repair; deterioration everywhere is not.
03
Deck condition
Soft, rotted or damaged decking found during inspection changes a repair into a larger conversation.
04
Leak history
Recurring leaks in different places signal system failure; a first leak at one detail usually does not.
- Benefits
Benefits Of Hiring Us In New York
A roof earns trust by keeping water out quietly for years — diagnosis, honest advice and correct detailing are the standards behind that result.
Diagnosis First
We locate the entry point before quoting the repair. Stains are symptoms, not locations, and sealing the wrong place is how leaks come back.
Repair When Repair Works
Targeted fixes are recommended honestly where the roof still has serviceable life — replacement is advised on evidence, not by default.
Systems, Not Coverings
Replacements include deck, underlayment, flashing and drainage as one assembly, so the new roof is a system rather than a fresh surface over old weaknesses.
Roofline Expertise
Parapet and flashing work is coordinated with our own masonry team, so the junctions where roofs meet walls are handled as one detail.
- Our Projects
Proven Quality, Best Results
- Testimonials
Built on Trust, Proven By Testimonials
98% Clients Are Positive Reviews 1 2
- Our Faq
Clear Answers to Your Construction Questions
The stain is in one room — does that mean the leak is directly above it?
Not usually. Water commonly enters at one point, runs along the deck, a rafter or a pipe, and emerges somewhere lower or further along. That is why diagnosis matters: sealing the area above the stain often misses the entry point entirely, and the leak returns with the next storm. We trace the water path back to where it actually gets in, and repair that point.
How long does a roof replacement take?
Most house roofs are completed in days rather than weeks once work begins; flat roofs on larger buildings take longer depending on area, tear-off conditions and detail work. Weather can pause roofing — we do not open a roof we cannot make watertight the same day. A realistic schedule for your roof is given with the written scope, before you commit.
Can a flat roof be repaired instead of replaced?
Frequently, yes — split seams, failed flashing and localized membrane damage are repairable, and correcting drainage extends a flat roof’s life significantly. Replacement becomes the recommendation when the membrane is broadly deteriorated, saturated insulation is present, or repairs keep multiplying across different areas. Our assessment shows you which condition your roof is in, with the evidence.
Do you repair chimney and parapet flashing?
Yes — and it is some of the most valuable roofing work there is. Failed flashing at chimneys, walls and parapets is behind a large share of leaks blamed on “the roof.” We renew flashing properly, integrated with the covering and the masonry, rather than smearing sealant on the surface — sealant over a failed junction is a temporary gesture, not a repair.
What does a roof repair or replacement cost in New York?
A targeted repair is priced on the detail involved and the access it needs. A replacement turns on the roof’s size and pitch, how many old layers must come off, the condition of the deck underneath, and the covering and drainage work in the system. That is why a responsible figure follows an inspection rather than a photograph. Our estimate at your property is free, and the written scope separates repair from replacement plainly, so you can see what drives the price.
- Services Areas
Proudly Serving Across New York
From interior renovations to exterior restoration, RT General Construction Inc delivers dependable construction and remodeling solutions for residential and commercial properties across New York. Our team handles everything from masonry, concrete, roofing, and exterior repairs to kitchens, bathrooms, painting, and interior improvements.
- New York
- Jerome Park, NY
- Village of Pelham, NY
- Harlem, NY
- Eastchester, NY
- North Side, NY
- Yonkers, NY
- New Rochelle, NY
- Pelham Manor, NY
- Mamaroneck, NY
- Larchmont, NY
- Tuckahoe, NY
- Hastings-on-Hudson, NY
- Scarsdale, NY
- Bronxville, NY
- White Plains, NY
- Manhattan, NY
- Astoria, NY
- Long Island City, NY
- Fresh Meadows, NY
- Flushing, NY
- Bayside, NY
- Queens, NY
Let's Build Something Amazing Together
Tell us about your project and we will arrange an assessment, explain what the work involves and provide a written scope before anything begins. One contractor, one plan, one accountable team — that is how RT General Construction Inc runs every job, large or small.