Masonry Contractors in New York
Request An Estimate

About Our Masonry Services
A masonry wall is a system, not a stack of bricks. The units carry the load and take the weather; the mortar joints between them are the sacrificial layer, meant to absorb slight movement, shed water and wear away slowly over decades so the units do not have to. Our masonry service covers the whole life of that system: repointing and mortar renewal where joints have worn, brick, block and stone work where units have failed or new construction is needed, lintel replacement where embedded steel has corroded, structural repair where walls have bulged or cracked through, and the chimney and coping details where weather hits hardest. Where a facade combines systems, our brick and stucco contractors restore both under one scope.
Because one contractor carries the wall from assessment to walkthrough, the diagnosis stays honest. Structural symptoms are read, not just filled — a stepped crack usually signals movement, a horizontal crack points to corroding steel, a bulge means the outer layer has separated from the wall behind it — and each cause carries a different repair. Materials are matched to the building in front of us: brick by size, color range and texture, mortar sampled from the existing joints and blended for strength, color and profile. On older New York buildings that discipline is the difference between a restoration and a patch that damages the wall it was meant to save.
What Is Masonry Work?
Masonry work is the construction and repair of structures built from individual units — brick, concrete block or stone — bedded in mortar. The repair side of the trade works at distinct depths, and choosing the right one matters. Repointing renews only the mortar joints, the wall’s wearing layer. Unit replacement cuts out failed brick or stone and rebuilds those sections. Structural repair goes deeper, stabilizing or rebuilding wall sections whose bond, ties or support have failed. New construction builds walls, piers and elements from the ground up. Each depth has its place; the error is applying a shallow one to a deep problem.
Most masonry failure is a water story. Once moisture gets inside a wall, it rusts the embedded steel — lintels, wall ties, shelf angles — and rust expands as it forms, cracking brick and pushing walls outward. New York’s freeze-thaw cycles add a second attack, spalling the faces off saturated units within a few winters. Age matters too: pre-war buildings were built with softer brick in lime-rich mortar, and repointing them with a hard modern mix traps moisture and forces the damage into the brick itself. A sound scope therefore starts with diagnosis, and on taller New York City buildings it also accounts for the Facade Inspection Safety Program’s inspection and correction requirements.
- Our Services
Types Of Services We Offer
Brick Pointing & Repointing
Failed mortar ground out and renewed across full facades or targeted areas, matched to the original joints so water stays out and the wall reads as one.
Brick Crack Repair & Replacement
Stepped, spalling and hairline cracks diagnosed to their cause and repaired — units replaced, joints stitched, sections rebuilt where needed.
Chimney Repair & Rebuilding
Chimneys repaired from crown to flashing — repointing, rebuilds, crown and flashing renewal for stacks that draw safely and shed water.
CMU Block Work
Concrete block walls, foundations and partitions laid plumb and reinforced, for structural and non-structural scopes across New York.
Masonry Steps & Entryways
Masonry steps, stoops and entryways built or rebuilt with even rises, sound footings and treads that shed water.
Lintel & Shelf Angle Replacement
Rusted window lintels and shelf angles replaced with protected steel, flashing renewed and the masonry above properly supported.
Retaining Walls & Curbs
Retaining walls and curbs built or rebuilt below frost with drainage behind the face, for soil that stays where it belongs.
Decorative Stone & Veneer Installation
Natural and manufactured stone veneer installed as a full system — barrier, flashing and stone — on facades, entries and interiors.
Steel Reinforcement
Helical ties, stitching bars and structural steel that pin, stitch and stabilize masonry walls showing movement or separation.
Searching for Masonry Contractors Near Me?
Looking for masonry contractors near you in New York? From our home base in Yonkers, RT General Construction Inc works across Westchester County, the Bronx, Manhattan and Queens — from brownstone and pre-war brick in Harlem and Manhattan to older colonials and garden apartments in New Rochelle, Scarsdale and Bronxville. The building stock changes from area to area, but our standard of assessment and repair does not: we inspect the wall in person, photograph the conditions, and separate what genuinely needs rebuilding from what only needs its joints renewed. You then receive a written, itemized scope naming which areas will be repointed, rebuilt or replaced, and which materials will be matched. Masonry sits within our wider exterior services, so related facade, parapet and roofing work is coordinated by the same team rather than split between companies. Call us or send the form on this page to arrange a free estimate at your property.

- Why Choose Us
Masonry Work Matched To The Building It Serves
Masonry fails in specific ways, and each one points to a different repair. Open joints, cracked units, leaning sections and rusting steel all look similar from the sidewalk, but they need different scopes, different materials and different sequencing. We assess the wall itself before recommending anything, match mortar and units to the existing work, and rebuild only what cannot be repaired soundly. From a single stoop to a full facade, the masonry scope is written around your building — not around a standard package.
- Wall Assessed Before Scoping
- Mortar Matched To Existing Joints
- Repair First, Rebuild When Needed
- Brick & Stone Units Matched
- Protected Sidewalks & Plantings
- Final Walkthrough On Every Job
Support After The Work
Masonry questions do not end at completion. We stay available for the follow-up checks and small adjustments settled work sometimes needs.
Sequenced Around Occupancy
Scaffolding, access and noisy stages are planned around the people living and working in the building, not just our own schedule.
One Crew, Every Masonry Trade
Pointing, brickwork, block, stone and steel under one scope, so related problems get solved together instead of in separate visits.
- Our Process
Process, How we Works.
01
Mortar that crumbles, recesses or falls out
When touched — the joint has lost its bond and its weatherproofing.
02
Cracked, flaking or spalling brick faces
Moisture trapped in the unit is destroying it from inside.
03
Stair-step cracks through joints
Movement in the wall that should be assessed, not just filled.
04
Bulging or leaning wall sections
Loss of tie or bond between wythes; a structural concern.
- Benefits
Benefits Of Hiring Us In New York
Masonry lasts when the material matches and the cause is fixed before the joint is filled — these are the standards our walls are assessed and repaired to.
Compatible Materials, Every Time
Mortar matched to your building’s original in strength, color and profile — never one standard mix forced into every wall.
Diagnosis Before Repair
Cracks and bulges are traced to their cause first, so the work fixes why the wall failed instead of covering the symptom.
Restoration And New Build, One Team
Delicate repointing on historic facades and new masonry construction come from the same crew, held to the same standard.
Considerate Site Practice
Openings protected, dust and debris controlled, and neighbours’ access respected throughout the job.
- Our Projects
Proven Quality, Best Results
- Testimonials
Built on Trust, Proven By Testimonials
98% Clients Are Positive Reviews 1 2
- Our Faq
Clear Answers to Your Construction Questions
How do I know whether my wall needs repointing or rebuilding?
Recessed or missing mortar with sound bricks usually means repointing is enough; displaced, bulging or cracked-through units point to rebuilding. The two can look similar from the sidewalk but carry very different scopes and costs. Our assessment examines the joints, the units and any signs of movement, then separates what genuinely needs rebuilding from what only needs its joints renewed — so you pay only for what the wall actually requires.
Does New York City regulate work on building facades?
Yes. Taller buildings in New York City fall under the Facade Inspection Safety Program, which requires periodic facade inspections and correction of any unsafe conditions found. Structural masonry work also generally requires permits. The exact rules depend on the building’s size, location and the scope involved, so during the assessment we identify which requirements apply to your property and build them into the written scope before work begins.
When is the best time of year for masonry work in New York?
Mortar needs above-freezing temperatures to cure properly, so spring through fall is the ideal window. That said, safety repairs should never wait for the season: a leaning wall, bulging brick or loose units over a sidewalk are hazards now, not in May. We advise honestly on timing for your specific job and can sequence urgent stabilization ahead of finishing work where that is the right order.
Can new brick and mortar really be matched to my older building?
Closely, yes. Brick is matched for size, color range and texture, and mortar is sampled from the existing joints and blended to the original in color and strength. On heavily weathered facades, a perfect invisible match is not always realistic — decades of sun and grime cannot be replicated exactly — and where that is the case, we say so upfront rather than promising what the wall cannot deliver.
Will scaffolding be needed for my masonry repair?
It depends on the height of the work and the access available. Low repairs can often be done from ladders or a lift, while upper-floor work usually requires scaffolding or a suspended platform. Where scaffold stands over a public sidewalk, protection requirements apply. All of this is identified during the assessment and set out in the written scope, so there are no surprises about access or cost once work begins.
- Services Areas
Proudly Serving Across New York
From interior renovations to exterior restoration, RT General Construction Inc delivers dependable construction and remodeling solutions for residential and commercial properties across New York. Our team handles everything from masonry, concrete, roofing, and exterior repairs to kitchens, bathrooms, painting, and interior improvements.
- New York
- Jerome Park, NY
- Village of Pelham, NY
- Harlem, NY
- Eastchester, NY
- North Side, NY
- Yonkers, NY
- New Rochelle, NY
- Pelham Manor, NY
- Mamaroneck, NY
- Larchmont, NY
- Tuckahoe, NY
- Hastings-on-Hudson, NY
- Scarsdale, NY
- Bronxville, NY
- White Plains, NY
- Manhattan, NY
- Astoria, NY
- Long Island City, NY
- Fresh Meadows, NY
- Flushing, NY
- Bayside, NY
- Queens, NY
Let's Build Something Amazing Together
Tell us about your project and we will arrange an assessment, explain what the work involves and provide a written scope before anything begins. One contractor, one plan, one accountable team — that is how RT General Construction Inc runs every job, large or small.