Brick Pointing & Repointing Contractors In New York

Mortar joints are the working surface of a brick wall: they shed water, absorb movement and hold the units together. When they crack, recess or powder away, the wall starts drinking water with every storm. Our brick pointing, repointing and tuckpointing service renews those joints properly — failed mortar is raked out to sound material and replaced with a mix matched to your wall in strength, color and profile, then tooled and cured so the joint sheds water the way it was built to. We repoint houses, brownstones, apartment buildings and commercial facades across New York, from a single weather-beaten elevation to full-facade programmes tied to inspection findings. Every job starts with an in-person look at the wall and a written, itemized scope. Request a free estimate using the form on this page.

Request An Estimate

Tell us a little about your project, and our team will review your requirements and get in touch to schedule a free estimate.
Mason grinding out a failed mortar joint while brick pointing in New York

About Our Brick Pointing & Repointing Services

Repointing looks simple from the sidewalk, but it is the masonry repair most often done badly. The two decisions that decide whether it lasts are how deep the old mortar comes out and what goes back in. We rake joints out to sound material — never a shallow smear over failed mortar — and we match the new mix to the original: a mortar harder than the brick forces freeze-thaw stress into the brick face and spalls it, which is why matching strength matters as much as matching color. Our masonry contractors carry repointing as part of complete wall care, so where individual units have already cracked or spalled, brick crack repair and replacement is folded into the same scope instead of being pointed over.

The work runs in a strict order: joints are cut and cleaned, the wall is wetted to control suction, mortar is packed in layers and tooled to the original profile — flush, concave or weather-struck — and the finished work is protected while it cures. On occupied buildings we manage dust, access and noise around residents, and on larger facades we sequence elevations so the building is never left open to weather. The result is a wall whose joints read as one continuous surface, shed water correctly, and return the masonry to doing the job it was built for: keeping the building dry and holding it together.

What Is Brick Pointing & Repointing?

Pointing is the finishing of mortar joints in new masonry; repointing is its repair counterpart — the removal and replacement of deteriorated mortar in an existing wall. The terms are often used interchangeably, and you will also hear tuckpointing, which is a decorative finish tooled into fresh mortar to imitate a fine, narrow joint, common on older New York brickwork.

The signs that a wall is due are easy to read once you know them: mortar recessed noticeably behind the brick face; joints that powder or crumble when probed; hairline cracks running along the edges of the units; mortar fallen out in sections; damp patches appearing on inside walls after rain; and white efflorescence salts blooming across the face. Left alone, open joints let wind-driven rain straight into the wall assembly, where it drives freeze-thaw damage to the bricks themselves. Sound repointing reverses that path: it reseals the wall’s drainage surface, restores the bond between units, and — because mortar is the sacrificial element of a brick wall by design — it is far cheaper to renew joints on a cycle than to rebuild wall sections whose units failed after years of water entry. Done with a compatible mix and proper depth, repointing routinely lasts decades.

Types Of Services We Offer

Full-Facade Repointing

Whole elevations raked out to sound mortar and renewed in matched mix, so the entire wall sheds water and weathers as one surface.

Spot Repointing & Joint Repair

Targeted renewal of the joints that have failed — one elevation, one chimney shoulder, one weather-beaten corner — before the damage spreads.

Multi-Unit & Facade Programmes

Elevation-by-elevation repointing programmes for apartment and commercial buildings, documented for facade-inspection maintenance.

Water-Resistant Repointing

Joint renewal detailed for the elevations that take driving rain, with profiles tooled to throw water off the wall face.

Brick Repair & Replacement

Cracked and spalled units cut out and replaced with matched bricks as part of the same scope, never pointed over.

Searching for Brick Pointing & Repointing Contractors Near Me?

If you are searching for brick pointing and repointing contractors near you in New York, judge the contractor by the questions they ask about your wall — the age of the building, the original mortar, which elevations take the weather — because those answers decide the mix and the method. RT General Construction Inc is based in Yonkers and repoints brickwork across Westchester County, the Bronx, Manhattan and Queens, from single-family brick homes to multi-unit facades where joint renewal is part of Local Law 11 maintenance. On buildings covered by the Facade Inspection Safety Program, repointing is the most common repair item a filing calls for, and our elevation-by-elevation documentation of joint condition is kept in the form the filing engineer needs. We inspect in person and give you a written scope that separates the joints that need renewal now from those that can wait, so you can phase the work honestly. Our wider masonry services cover the repairs that often travel with repointing, carried by one accountable team. Call us or send the form on this page to arrange a free estimate at your property.

Brownstone facade being repointed from scaffolding in New York

Repointing Matched To The Mortar Your Wall Needs

Repointing fails when the new mortar is harder than the brick or matched by eye instead of by the wall’s age and exposure. We test and select mixes that suit the original construction, grind out failed joints to a proper depth, and pack and tool new mortar in lifts so it bonds and sheds water the way the joint was designed to. Test panels confirm the match before full elevations proceed, so the finished wall reads as one.

Honest Depth Assessment

If the mortar is sound beyond the surface, we say so — spot work where it serves, full repointing only where needed.

Elevation-By-Elevation Programme

Facades are staged in a planned order, with access and protection arranged once for the whole scope.

Pointing Within Full Masonry

Cracked units, lintels and steel found along the way can be handled in the same mobilization.

Process, How we Works.

01

Recessed Or Crumbling Joints

Mortar sitting well behind the brick face, or powdering when rubbed, has lost its ability to shed water and bond the units.

02

Hairline Cracks Along Joints

Cracks where mortar meets brick are the first entry points for wind-driven rain into the wall.

03

Interior Damp After Rain

Damp patches or staining on inside walls that track storms usually trace back to open joints above.

04

Spalling Brick Faces

Brick faces popping off in flakes often mean hard, wrong mortar is forcing freeze-thaw damage into the units — a mix problem, not just age.

Benefits Of Hiring Us In New York

Repointing fails early when the mix is wrong or the depth is shallow. Our crews match mortar to the wall, cut to sound material and tool to the original profile — here is what that discipline gets you.

Mortar Matched To Your Wall

Strength, color and profile matched to the original, so new joints weather with the wall instead of damaging it.

Depth, Not Cosmetics

Joints raked out to sound material and packed in layers; no shallow smears that peel off in two winters.

The Whole Wall, One Team

Cracked units, lintels and flashing issues found during the work are reported and scoped, not pointed over.

Written, Phased Scopes

Elevations documented one by one, urgent joints separated from watch-list joints, so you can phase honestly.

Proven Quality, Best Results

Built on Trust, Proven By Testimonials

98% Clients Are Positive Reviews 1 2

Google
SYED ALI profile picture
SYED ALI
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Very honest and reliable company. Work was neat, would recommend them.
Google
Fixmy Car profile picture
Fixmy Car
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
They installed new concrete steps and renovated my patio. Durable work and professional contractor
Google
linda cindy profile picture
linda cindy
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Very professional flooring. Demo and install done in 48 hrs
Google
Ahsan Iqbal profile picture
Ahsan Iqbal
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
They renovated my kitchen and painted my house. Work was clean and quality was very good. Highly recommend.

Clear Answers to Your Construction Questions

Pointing finishes the joints of new masonry. Repointing repairs existing walls: the deteriorated mortar is raked out to sound material and replaced with fresh mortar matched to the original. Tuckpointing is a decorative tooled finish sometimes applied during repointing on older brickwork.

Look for mortar recessed behind the brick face, joints that crumble or powder when probed, cracks along the edges of bricks, and interior damp that appears after rain. Any one of these means the joints have stopped shedding water and should be assessed.

With a compatible mix, proper depth and correct tooling, repointing routinely lasts decades. Its lifespan shortens when the mortar is harder than the brick, when joints are only skimmed over, or when water is still entering from failed coping or flashing above the wall.

Yes. Color comes from the sand and pigment, strength from the mix proportions, and the profile from the tooling. We test and compare on a small area first, because a mortar that is too hard can crack historic brick while one that is too soft washes out early — the match has to be right on all three.

Cost depends on the area of wall, the depth of joint failure, access (scaffold or lift versus ladder work), and whether damaged bricks or lintels need repair in the same scope. We measure and document each elevation during the free estimate, so your written scope prices the actual condition of your wall.

Repointing on its own generally does not require a DOB permit — it is maintenance of the existing wall. The approvals that can apply sit around it: scaffolding and sidewalk sheds carry their own permits, and landmarked buildings generally need Landmarks approval before facade work begins. We flag which of those, if any, applies to your building during the estimate.

Proudly Serving Across New York

From interior renovations to exterior restoration, RT General Construction Inc delivers dependable construction and remodeling solutions for residential and commercial properties across New York. Our team handles everything from masonry, concrete, roofing, and exterior repairs to kitchens, bathrooms, painting, and interior improvements.

Let's Build Something Amazing Together

Tell us about your project and we will arrange an assessment, explain what the work involves and provide a written scope before anything begins. One contractor, one plan, one accountable team — that is how RT General Construction Inc runs every job, large or small.