Structural Repairs Contractors In New York
Request An Estimate

About Our Structural Repair Services
Most structural repair on New York’s older buildings begins with the same quiet mechanism. Steel is embedded throughout these facades — lintels over every opening, shelf angles at floor lines, ties and anchors inside the wall — protected by the masonry around it. When water reaches it through failed joints, cracked units or tired flashing, the steel rusts; and rust occupies several times the volume of the steel it came from. That expansion has nowhere to go, so it goes outward: it lifts and cracks the masonry above a lintel, jacks courses apart at a shelf angle, spalls the concrete off a slab edge as the rebar inside it swells. The trade calls it rust jacking, and the stain on the face is the last chapter of a story that started years earlier, at a joint nobody renewed.
Repairing it is a sequence, not a patch. The affected masonry or concrete is opened so the steel itself can be read — section loss decides whether the member is cleaned, treated and protected or cut out and renewed to the engineer’s specification. Sound material is rebuilt around sound steel, with flashing installed this time so the mechanism does not restart. Within a wider programme, the same discipline covers crack stitching and anchoring where walls have moved, and shoring-led scopes where an element must be supported while it is repaired. The replacement of lintels and shelf angles as a craft in its own right is scoped on our lintel and shelf angle replacement page; this page owns the building-scale picture those repairs sit inside.
What Is A Structural Repair?
A repair is structural when it restores a load path. Buildings stand because weight is carried on a continuous route — roof to wall, wall to lintel, lintel to jamb, floor to beam, beam to column, everything down to the ground — and they tolerate an astonishing amount of cosmetic damage without complaint. Structural damage is the kind that interrupts that route or weakens the material carrying it: steel that has lost section to rust, concrete whose rebar is exposed and swelling, masonry cracked through by movement rather than across its surface. The distinction decides everything downstream — who must design the repair, how it is sequenced, and whether it can wait.
It is also why structural repair is scoped differently from everything else on this site. A cosmetic repair is finished when it looks right; a structural repair is finished when the load path is continuous again and the mechanism that broke it — almost always water, given time — is closed off. Where the diagnosis or the design crosses into engineering, that work belongs to a licensed engineer engaged by the owner; our scope is to execute to that design, document the work, and tell you plainly, at assessment, when the engineer comes before the contractor.
- Our Services
Types Of Services We Offer
Structural Repair Programmes
Building-scale structural repair run as a phased programme: signs read, mechanism named, engineer's scope where one is needed, safety-critical work first.
Corroded Steel & Rust-Jacking Repair
The mechanism behind most of this work: water-fed rust expanding inside the wall, cracking the masonry around it — opened, read, treated or renewed, and the water path closed.
Concrete Spalling & Slab-Edge Repair
Concrete that has spalled off corroded rebar — at slab edges, spandrels and balcony lines — cut back to sound material and rebuilt around protected steel.
Crack Stitching & Wall Anchoring
Stepped and movement cracks stabilised by stitching and tying the wall back together — where the reading says the movement is historic, not live.
Masonry Structural Rebuilding
Wall sections that have lost their bond, their plane or their bearing, taken down and rebuilt to carry again — tied into the sound masonry around them.
Shoring & Stabilisation-Led Repairs
Elements supported before they are touched: shoring and stabilisation as the first stage of scopes where the repair itself would otherwise unload the building.
Lintel & Shelf Angle Replacement
Lintel failure explained here, replaced there: the replacement of lintels and shelf angles as a craft in its own right is scoped on our masonry page.
Local Law 11 (FISP) Repairs
Structural conditions listed in a FISP report run under that page's process — deadlines, sequencing and the documentation your QEWI files behind.
Searching for Structural Repair Contractors Near Me?
If you are searching for structural repair contractors near you in New York because a crack, a spall or a rust stain has started to worry you, the first deliverable you should expect is a reading, not a quote. RT General Construction Inc is based in Yonkers and carries out structural repairs across Westchester County, the Bronx, Manhattan and Queens — houses and small-to-mid buildings, and the structural conditions that arrive inside facade programmes and inspection reports. Every building is assessed in person first: the signs read, the mechanism named, and the honest next step stated — which is sometimes our scope, sometimes an engineer’s design first, and sometimes monitoring rather than work. Where a FISP report has listed the conditions, the programme runs under our local law 11 repairs process; the wider envelope context sits within our exterior repair and renovation service. Call us or send the form on this page to arrange a free estimate at your property.

- Why Choose Us
Repairs That Restore The Load Path — And Say What Isn't Ours
Structural work is where contractor honesty matters most, because the customer cannot see the difference between a repair and a decoration until years later. Our discipline is readable: the signs assessed in person, the mechanism named in plain language, the engineer’s role stated before pricing — never after — and programmes phased so safety comes first and every opened-up finding is reported as found. You will always know which parts of your building’s problem are ours, which are an engineer’s, and which are simply not structural.
- Signs Read Before Scopes
- The Mechanism, In Plain Language
- Engineer First, When Engineer First
- Safety Sequenced Ahead Of Everything
- Findings Reported As Found
- Phased Programmes, Written Down
Cosmetic Work Is Never Sold As Structural
If your crack is the harmless kind, the assessment says so and the scope shrinks accordingly. The diagnosis is the deliverable, whatever it finds.
Opened Up Means Shown To You
Once masonry is open, the steel’s true condition is reported — photographs and plain language — before the programme moves an inch.
Water Closed Off With The Repair
Rust jacking restarts wherever the water path survives. Every structural scope here includes closing the entry that fed the corrosion.
- Our Process
Process, How we Works.
01
Stepped Or Diagonal Cracks From Openings
Cracks that stair-step through joints or run diagonally from window and door corners are the wall reporting movement or corroding steel behind the face. This is the pattern that earns an assessment, not a filler.
02
Rust Stains And Cracked Brick Above Windows
The lintel signature: steel over the opening is rusting and expanding, lifting the masonry it carries. Caught early it is a lintel scope; left, it becomes wall rebuilding.
03
Concrete Spalling With Rust Showing
Concrete fallen away with corroded rebar visible means water reached the steel and the steel is pushing the cover off. The spall is the symptom; the corrosion is the repair.
04
A Wall That Bulges Or Leans
Masonry leaving its plane has lost its ties or its support. This is the sign that skips the queue: it is read promptly, and shoring or protection may come before any repair conversation.
- Benefits
Benefits Of Hiring Us In New York
Structural work is bought on trust or not at all. Here is what a diagnosis-led programme gets you.
The Mechanism Named Before The Method
Rust jacking, movement, water-fed corrosion: the cause is established at assessment, so the repair answers what is actually failing — not the crack it produced.
The Engineer's Role Stated Plainly
Where diagnosis or design belongs to a licensed engineer, you hear it before any pricing. We execute to the engineer’s scope and document against it — no blurred credentials.
Safety-Critical Work Sequenced First
Programmes are phased honestly: what endangers people or the building is stabilised and repaired first; what can be programmed follows in order, in writing.
Opened-Up Findings Reported As Found
Steel is read once the masonry is open, and what we find is reported before the scope moves — section loss, hidden corrosion, the honest variation, in the open.
- Our Projects
Proven Quality, Best Results
- Testimonials
Built on Trust, Proven By Testimonials
98% Clients Are Positive Reviews 1 2
- Our Faq
Clear Answers to Your Construction Questions
What Do Structural Repairs Cost In New York?
Cost turns on which members are involved and how much corrosion or movement the opening-up finds, the shoring and access the repair needs, whether an engineer’s design is part of the programme, and how much masonry or concrete rebuilding surrounds the structural work itself. Structural scopes carry an honest unknown — the steel’s condition is only fully readable once it is exposed — which is why we assess in person, stage the scope, and price the written programme in phases rather than inventing a figure from the pavement.
What Are The Warning Signs Of Structural Problems On A Building's Exterior?
The ones worth acting on: cracks that step through mortar joints or run diagonally from the corners of openings; spalling concrete with rust staining or visible corroded rebar; rust stains and cracked units above windows, marking corroding lintels; mortar joints opened by courses being jacked apart; walls that bulge, bow or lean out of plane; and slab edges deteriorating at floor lines. Surface hairlines in render are usually cosmetic by contrast — the assessment exists to tell the two apart, and we will tell you when yours is the harmless kind.
Do I Need An Engineer Before Structural Repairs?
Often, yes — and a contractor who never says so is telling you something. Structural diagnosis and the design of structural repairs belong to a licensed engineer, engaged by the building’s owner: the engineer establishes what has failed, what the repair must achieve, and the specification it is built to. Our role is to execute that scope faithfully, coordinate the sequence, and document the work. At assessment we will tell you plainly whether your condition needs an engineer first, can proceed on an existing engineer’s or QEWI’s requirements, or is not structural at all.
What Causes Steel Inside A Facade To Corrode?
Water, given time and a way in. The steel in these walls — lintels, shelf angles, ties, rebar — was protected by the masonry or concrete around it. Failed joints, cracked units, worn flashing and open cracks let water reach it; the steel rusts; and because rust occupies several times the volume of the metal it replaces, the expansion cracks and spalls the material covering it — which opens the way for more water. That cycle is why the repair always includes closing the water path, not only renewing the steel.
Can Structural Repairs Be Done In Phases?
Yes — and on most buildings they should be planned that way. The honest order is set by risk, not by elevation: conditions that threaten safety or are actively deteriorating are stabilised and repaired first; sound-but-needed work is programmed after, in a written sequence that keeps the building protected between phases. Phasing is set out in the scope before work begins, including what each phase closes off and what it deliberately leaves for the next — so a phased programme is a plan, not an unfinished job.
- Services Areas
Proudly Serving Across New York
From interior renovations to exterior restoration, RT General Construction Inc delivers dependable construction and remodeling solutions for residential and commercial properties across New York. Our team handles everything from masonry, concrete, roofing, and exterior repairs to kitchens, bathrooms, painting, and interior improvements.
- New York
- Jerome Park, NY
- Village of Pelham, NY
- Harlem, NY
- Eastchester, NY
- North Side, NY
- Yonkers, NY
- New Rochelle, NY
- Pelham Manor, NY
- Mamaroneck, NY
- Larchmont, NY
- Tuckahoe, NY
- Hastings-on-Hudson, NY
- Scarsdale, NY
- Bronxville, NY
- White Plains, NY
- Manhattan, NY
- Astoria, NY
- Long Island City, NY
- Fresh Meadows, NY
- Flushing, NY
- Bayside, NY
- Queens, NY
Let's Build Something Amazing Together
Tell us about your project and we will arrange an assessment, explain what the work involves and provide a written scope before anything begins. One contractor, one plan, one accountable team — that is how RT General Construction Inc runs every job, large or small.